论高校教师的素质

教学质量是高校生存和发展的生命线。教学质量高低取决于教师的素质。高校教师必须具备较高的政治素质、业务素质,在实践中不断提高教学水平和科研能力。     

炮兵营射击的弹着点模拟及射击误差分析

弹着点模拟是对敌火力打击目标毁伤仿真的重要环节。在分析炮兵营射击误差构成与计算方法的基础上,研究建立了炮兵射击的弹着点散布蒙特卡洛(Monte-Carlo)仿真模型,实现了对集火射向、适宽射向、三距离射击等多种火力打击方式共同作用下的弹着点散布模拟,为目标毁伤仿真研究提供了模型支持。以此为基础,通过分析各组误差对毁伤概率的影响,发现对于炮兵营打击面散布目标来说,营共同误差是影响毁伤概率的最显著因素,应当通过提高测定目标位置和气象准备的精度减小误差以提高对目标的毁伤效果。     

Ka频段自适应Turbo-OFDM技术

分析了Ka频段卫星通信信道的性能,建立了Ka频段自适应Turbo编码正交频分复用系统模型,提出了一种简洁的自适应Turbo-OFDM调制控制和编码控制算法,该算法可以兼顾系统性能和编码速率,得到较高的吞吐量和较低的误码率.仿真结果表明,采用自适应控制的Turbo-OFDM系统与没有采用自适应的系统相比较,在误码率为10...     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

双层地下室空气冲击波特性的模型试验研究

高层建筑多层地下室内人防结构顶板核爆荷载的合理确定是目前人防结构设计中亟待解决的问题。文中在对实际工程的调查基础上,研究了双层地下室的试验模型,进行了空气冲击波在地下室模型内传播的爆炸试验,分析了作用在双层地下室底层结构顶板的爆炸压力分布特性,并得出多层地下室的底层顶板核爆荷载一般要小于单层地下室顶板核爆荷载设计值的结论.     

GPS接收信号中线性扫频干扰的抑制

研究了阵列接收的GPS接收信号中线性扫频(LFM)干扰的抑制问题。LFM信号瞬时频率的估计是抑制干扰的关键,而要准确估计信号瞬时频率,必须抑制接收信号时频分布中交叉项干扰。本文对接收信号矢量进行白化,得到信号矢量白化后的空时频分布(STFD)矩阵。文中推出一个与传统方法获得的判决变量不同的判决变量,用该判决变量可以更加清晰地选出LFM信号在时频分布中的自项。根据时频脊点的分布估计LFM信号频率参数以及信号瞬时频率,之后即可根据瞬时频率构建陷波器滤除干扰。仿真表明该方法能够将受交叉项严重干扰的接收信号时频分布映射为清晰的接收信号自项的时频分布,在数据快拍数满足一定要求时可以很好地抑制掉LFM干扰。     

信息化条件下战斗精神培育需要关注的几个问题

信息化条件下的未来战争 ,必须注重官兵个体战斗精神的培育 ;必须大力培育科学精神 ,用科学的态度 ,分析作战的特点和规律 ,讲科学讲智谋 ;必须充分发挥人脑的作用 ,提高自身的作战能力 ,超常发挥智能潜能。     

坚持依法治国与以德治国的有机统一

治国方略的认识和定位 ,是马克思主义国家学说的重要内容。从依法治国到法治与德治相结合 ,是我党治国方略认识上的一次新飞跃 ;在依法治国的同时坚持以德治国 ,是对德治与法治关系的一种理论创新 ;把道德建设与法制建设结合起来 ,是新世纪社会主义精神文明建设的一个新抓手。始终不渝地坚持法治与德治的有机统一 ,对于有中国特色社会主义的持续、全面、健康发展 ,具有重大而深远的意义     

酸性条件下几种锅炉炉管钢腐蚀性能分析

研究了几种锅炉炉管钢在 p H=3的 H2 SO4 溶液中腐蚀速率的差异 .电化学测试结果表明 :炉管钢的腐蚀速率与钢中合金元素的种类和含量有一定关系 ;含铬、钼量较高的钢种腐蚀速率较低 .由此可见 ,铬元素是抑制炉管钢在酸性介质中发生腐蚀的最主要的合金元素 ,其他元素如钼、镍等对炉管钢的腐蚀性能也有重要影响